Template:Infobox settlement/sandbox2

Infobox settlement/sandbox2
Infobox settlement/sandbox2	{{{type}}}
	{{{type}}}
	Template:Infobox settlement/columns
	Template:Location map
	Coordinates: Template:Geobox coor

模板文档[查看] [编辑] [历史] [清除缓存]

使用Lua語言編寫：

Template:Uses Wikidata

This template is aliased or used as a sub-template for several infobox front-end templates. It should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera—in fact, any subdivision below the level of a country, for which {{Infobox country}} should be used. Parameters are described in the table below. For questions, see the talk page. For a U.S. city guideline, see WP:USCITIES.

Usage

Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.

Using metric units

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = 
| coordinates_type        = 
| coordinates_footnotes   = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| unit_pref               = Metric
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- <ref> </ref> -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square kilometers -->
| area_total_km2          = 
| area_land_km2           = 
| area_water_km2          = 
| area_urban_km2          = 
| area_rural_km2          = 
| area_metro_km2          = 
| area_blank1_km2         = 
| area_blank2_km2         = 
<!-- hectares -->
| area_total_ha           = 
| area_land_ha            = 
| area_water_ha           = 
| area_urban_ha           = 
| area_rural_ha           = 
| area_metro_ha           = 
| area_blank1_ha          = 
| area_blank2_ha          = 
| length_km               = 
| width_km                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_m             = 
| population_as_of        = 
| population_footnotes    = 
| population_total        = 
| population_density_km2  = auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Using non-metric units

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = 
| coordinates_type        = 
| coordinates_footnotes   = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| unit_pref               = US<!-- or UK -->
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square miles --> 
| area_total_sq_mi        = 
| area_land_sq_mi         = 
| area_water_sq_mi        = 
| area_urban_sq_mi        = 
| area_rural_sq_mi        = 
| area_metro_sq_mi        = 
| area_blank1_sq_mi       = 
| area_blank2_sq_mi       = 
<!-- acres -->
| area_total_acre         = 
| area_land_acre          = 
| area_water_acre         = 
| area_urban_acre         = 
| area_rural_acre         = 
| area_metro_acre         = 
| area_blank1_acre        = 
| area_blank2_acre        = 
| length_mi               = 
| width_mi                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_ft            = 
| population_as_of        = 
| population_footnotes    = 
| population_total        = 
| population_density_sq_mi= auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Short version

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| etymology               = 
| nickname                = 
| coordinates             = <!-- {{Coord}} -->
| coordinates_type        = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| website                 = <!-- {{URL|example.com}} -->
}}

Complete empty syntax, with comments

This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

{{Infobox settlement
| name                    = <!-- at least one of the first two fields must be filled in -->
| official_name           =
| native_name             = <!-- if different from the English name -->
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| other_name              =
| settlement_type         = <!-- such as Town, Village, City, Borough etc. -->
<!-- transliteration(s) -->
| translit_lang1          =
| translit_lang1_type     =
| translit_lang1_info     =
| translit_lang1_type1    =
| translit_lang1_info1    =
| translit_lang1_type2    =
| translit_lang1_info2    = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 -->
| translit_lang2          =
| translit_lang2_type     =
| translit_lang2_info     =
| translit_lang2_type1    =
| translit_lang2_info1    =
| translit_lang2_type2    =
| translit_lang2_info2    = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 -->
<!-- images, nickname, motto -->
| image_skyline           =
| imagesize               =
| image_alt               =
| image_caption           =
| image_flag              =
| flag_size               =
| flag_alt                =
| flag_border             =
| flag_link               =
| image_seal              =
| seal_size               =
| seal_alt                =
| seal_link               =
| seal_type               =
| image_shield            =
| shield_size             =
| shield_alt              =
| shield_link             =
| image_blank_emblem      =
| blank_emblem_type       = <!-- defaults to Logo -->
| blank_emblem_size       =
| blank_emblem_alt        =
| blank_emblem_link       =
| etymology               = 
| nickname                =
| motto                   =
| anthem                  =
<!-- maps and coordinates -->
| image_map               =
| mapsize                 =
| map_alt                 =
| map_caption             =
| image_map1              =
| mapsize1                =
| map_alt1                =
| map_caption1            =
| pushpin_map             = <!-- name of a location map as per Template:Location_map -->
| pushpin_label_position  = <!-- position of the pushpin label: left, right, top, bottom, none -->
| pushpin_label           = <!-- only necessary if "name" or "official_name" are too long -->
| pushpin_map_alt         =
| pushpin_mapsize         =
| pushpin_relief          =
| pushpin_map_caption     =
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = <!-- to specify exact location of coordinates (was coor_type) -->
| coordinates_region      = <!-- ISO 3166-1 alpha-2 or ISO 3166-2 code for country/region containing the coordinates -->
| coordinates_type        = <!-- parameter list passed to Coord template, overrides coordinates_region -->
| coordinates_wikidata    = yes
| coordinates_footnotes   = <!-- for references: use <ref> tags -->
| grid_name               = <!-- name of a regional grid system -->
| grid_position           = <!-- position on the regional grid system -->
<!-- location -->
| subdivision_type        = Country
| subdivision_name        = <!-- the name of the country -->
| subdivision_type1       =
| subdivision_name1       =
| subdivision_type2       =
| subdivision_name2       = <!-- etc., subdivision_type6 / subdivision_name6 -->
<!-- established -->
| established_title       = <!-- Founded -->
| established_date        =
| established_title1      = <!-- Incorporated (town) -->
| established_date1       =
| established_title2      = <!-- Incorporated (city) -->
| established_date2       =
| established_title3      =
| established_date3       =
| established_title4      =
| established_date4       =
| established_title5      =
| established_date5       =
| established_title6      =
| established_date6       =
| established_title7      =
| established_date7       =
| extinct_title           =
| extinct_date            =
| founder                 =
| named_for               =
<!-- seat, smaller parts -->
| seat_type               = <!-- defaults to: Seat -->
| seat                    =
| seat1_type              = <!-- defaults to: Former seat -->
| seat1                   =
| parts_type              = <!-- defaults to: Boroughs -->
| parts_style             = <!-- list, coll (collapsed list), para (paragraph format) -->
| parts                   = <!-- parts text, or header for parts list -->
| p1                      =
| p2                      = <!-- etc., up to p50: for separate parts to be listed-->
<!-- government type, leaders -->
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         =
| governing_body          =
| leader_party            =
| leader_title            =
| leader_name             = <!-- add &nbsp; (no-break space) to disable automatic links -->
| leader_title1           =
| leader_name1            = <!-- etc., up to leader_title4 / leader_name4 -->
<!-- display settings -->
| total_type              = <!-- to set a non-standard label for total area and population rows -->
| unit_pref               = <!-- enter: Imperial, to display imperial before metric -->
<!-- area -->
| area_footnotes          = <!-- for references: use <ref> tags -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| dunam_link              = <!-- If dunams are used, this specifies which dunam to link. -->
| area_total_km2          = <!-- ALL fields with measurements have automatic unit conversion -->
| area_total_sq_mi        = <!-- see table @ Template:Infobox settlement for details -->
| area_total_ha           =
| area_total_acre         =
| area_total_dunam        = <!-- used in Middle East articles only -->
| area_land_km2           =
| area_land_sq_mi         =
| area_land_ha            =
| area_land_acre          =
| area_land_dunam         = <!-- used in Middle East articles only -->
| area_water_km2          =
| area_water_sq_mi        =
| area_water_ha           =
| area_water_acre         =
| area_water_dunam        = <!-- used in Middle East articles only -->
| area_water_percent      =
| area_urban_footnotes    = <!-- for references: use <ref> tags -->
| area_urban_km2          =
| area_urban_sq_mi        =
| area_urban_ha           =
| area_urban_acre         =
| area_urban_dunam        = <!-- used in Middle East articles only -->
| area_rural_footnotes    = <!-- for references: use <ref> tags -->
| area_rural_km2          =
| area_rural_sq_mi        =
| area_rural_ha           =
| area_rural_acre         =
| area_rural_dunam        = <!-- used in Middle East articles only -->
| area_metro_footnotes    = <!-- for references: use <ref> tags -->
| area_metro_km2          =
| area_metro_sq_mi        =
| area_metro_ha           =
| area_metro_acre         =
| area_metro_dunam        = <!-- used in Middle East articles only -->
| area_rank               =
| area_blank1_title       =
| area_blank1_km2         =
| area_blank1_sq_mi       =
| area_blank1_ha          =
| area_blank1_acre        =
| area_blank1_dunam       = <!-- used in Middle East articles only -->
| area_blank2_title       =
| area_blank2_km2         =
| area_blank2_sq_mi       =
| area_blank2_ha          =
| area_blank2_acre        =
| area_blank2_dunam       = <!-- used in Middle East articles only -->
| area_note               =
<!-- dimensions -->
| dimensions_footnotes    = <!-- for references: use <ref> tags -->
| length_km               =
| length_mi               =
| width_km                =
| width_mi                =
<!-- elevation -->
| elevation_footnotes     = <!-- for references: use <ref> tags -->
| elevation_m             =
| elevation_ft            =
| elevation_point         = <!-- for denoting the measurement point -->
| elevation_max_footnotes = <!-- for references: use <ref> tags -->
| elevation_max_m         =
| elevation_max_ft        =
| elevation_max_point     = <!-- for denoting the measurement point -->
| elevation_max_rank      =
| elevation_min_footnotes = <!-- for references: use <ref> tags -->
| elevation_min_m         =
| elevation_min_ft        =
| elevation_min_point     = <!-- for denoting the measurement point -->
| elevation_min_rank      =
<!-- population -->
| population_as_of        =
| population_footnotes    = <!-- for references: use <ref> tags -->
| population_total        =
| pop_est_as_of           =
| pop_est_footnotes       =
| population_est          =
| population_rank         =
| population_density_km2  = <!-- for automatic calculation of any density field, use: auto -->
| population_density_sq_mi=
| population_urban_footnotes     =
| population_urban               =
| population_density_urban_km2   =
| population_density_urban_sq_mi =
| population_rural_footnotes     =
| population_rural               =
| population_density_rural_km2   =
| population_density_rural_sq_mi =
| population_metro_footnotes     =
| population_metro               =
| population_density_metro_km2   =
| population_density_metro_sq_mi =
| population_density             =
| population_density_rank        =
| population_blank1_title        =
| population_blank1              =
| population_density_blank1_km2  =
| population_density_blank1_sq_mi=
| population_blank2_title        =
| population_blank2              =
| population_density_blank2_km2  =
| population_density_blank2_sq_mi=
| population_demonym      = <!-- demonym, e.g. Liverpudlian for someone from Liverpool -->
| population_note         =
<!-- demographics (section 1) -->
| demographics_type1      =
| demographics1_footnotes = <!-- for references: use <ref> tags -->
| demographics1_title1    =
| demographics1_info1     = <!-- etc., up to demographics1_title5 / demographics1_info5 -->
<!-- demographics (section 2) -->
| demographics_type2      =
| demographics2_footnotes = <!-- for references: use <ref> tags -->
| demographics2_title1    =
| demographics2_info1     = <!-- etc., up to demographics2_title5 / demographics2_info5 -->
<!-- time zone(s) -->
| timezone1               =
| utc_offset1             =
| timezone1_DST           =
| utc_offset1_DST         =
| timezone2               =
| utc_offset2             =
| timezone2_DST           =
| utc_offset2_DST         =
<!-- postal codes, area code -->
| postal_code_type        = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal_code             =
| postal2_code_type       = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal2_code            =
| area_code_type          = <!-- defaults to: Area code(s) -->
| area_code               =
| geocode                 =
| iso_code                =
| registration_plate_type =
| registration_plate      =
<!-- blank fields (section 1) -->
| blank_name_sec1         =
| blank_info_sec1         =
| blank1_name_sec1        =
| blank1_info_sec1        =
| blank2_name_sec1        =
| blank2_info_sec1        = <!-- etc., up to blank7_name_sec1 / blank7_info_sec1 -->
<!-- blank fields (section 2) -->
| blank_name_sec2         =
| blank_info_sec2         =
| blank1_name_sec2        =
| blank1_info_sec2        =
| blank2_name_sec2        =
| blank2_info_sec2        = <!-- etc., up to blank7_name_sec2 / blank7_info_sec2 -->
<!-- website, footnotes -->
| website                 = <!-- {{URL|example.com}} -->
| footnotes               =
}}

Parameter names and descriptions

Parameter name	Usage	Description
Name and transliteration [编辑]
name	optional	This is the usual name in English. If it's not specified, the infobox will use the official_name as a title unless this too is missing, in which case the page name will be used.
official_name	optional	The official name in English if different from name
native_name	optional	Name in the local language, if different from name, and if not English. This will display under the name/official name
native_name_lang	optional	Use ISO 639-2 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using `{{lang}}`, instead.
other_name	optional	For places with a former or more common name like Bombay or Saigon
settlement_type	optional	Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either name or official_name is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless total_type is set).
Transliteration(s)
translit_lang1	optional	Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article.
translit_lang1_type translit_lang1_type1 to translit_lang1_type6	optional
translit_lang1_info translit_lang1_info1 to translit_lang1_info6	optional
translit_lang2	optional	Will place a second transliteration. See Dêlêg
translit_lang2_type translit_lang2_type1 to translit_lang2_type6	optional
translit_lang2_info translit_lang2_info1 to translit_lang2_info6	optional
Images, nickname, motto [编辑]
Parameter name	Usage	Description
Skyline image
image_skyline	optional	Despite the name it can be any image that an editor wishes.
imagesize	optional	Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, px must be specified; default size is 250px.
image_alt	optional	Alt text for the image, used by visually impaired readers who cannot see the image. See WP:ALT.
image_caption	optional	Will place a caption under the image_skyline (if present)
Flag image
image_flag	optional	Used for a flag.
flag_size	optional	Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, px must be specified; default size is 100px.
flag_alt	optional	Alt text for the flag.
flag_border	optional	Set to 'no' to remove the border from the flag
flag_link	optional
Seal image
image_seal	optional	If the place has an official seal.
seal_size	optional	If used, px must be specified; default size is 100px.
seal_alt	optional	Alt text for the seal.
seal_link seal_type	optional
Coat of arms image
image_shield	optional	Can be used for a place with a coat of arms.
shield_size	optional	If used, px must be specified; default size is 100px.
shield_alt	optional	Alt text for the shield.
shield_link	optional	Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.
Logo or emblem image
image_blank_emblem	optional	Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See Kingston upon Hull's infobox for an example.
blank_emblem_type	optional	To specify what type of emblem "image_blank_emblem" is. The default is Logo.
blank_emblem_size	optional	If used, px must be specified; default size is 100px.
blank_emblem_alt	optional	Alt text for blank emblem.
blank_emblem_link	optional
Nickname, motto
etymology	optional	origin of name
nickname	optional	well-known nickname(s)
motto	optional	Will place the motto under the nicknames
anthem	optional	Will place the anthem (song) under the nicknames
Maps, coordinates [编辑]
Parameter name	Usage	Description
Map images
image_map	optional
mapsize	optional	If used, px must be specified; default is 250px.
map_alt	optional	Alt text for map.
map_caption	optional
image_map1	optional	A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1	optional	If used, px must be specified; default is 250px.
map_alt1	optional	Alt text for secondary map.
map_caption1	optional
Pushpin map(s), coordinates
pushpin_map	optional	The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields (from `\|coordinates=`) position a pushpin coordinate marker and label on the map automatically. Example: Padang, Indonesia. To show multiple pushpin maps, provide a list of maps separated by #, e.g., California#USA
pushpin_label_position	optional	The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
pushpin_map_alt	optional	Alt text for pushpin map.
pushpin_mapsize	optional	Must be entered as only a number—do not use px. The default value is 250.
pushpin_map_caption	optional	Fill out if a different caption from map_caption is desired.
pushpin_relief	optional	Set this to `y` or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
pushpin_overlay	optional	Can be used to specify an image to be superimposed on the regular pushpin map.
coordinates	optional	Latitude and longitude. Use `{{Coord}}`. See the documentation for `{{Coord}}` for more details on usage.
coor_pinpoint	optional	If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship
coordinates_region	optional	Can be used to override the default region: for the coordinates. Use either a two character ISO 3166-1二位字母代码 country code or an ISO 3166-2 region code. If coordinates_region is omitted or blank, region: will be set according to subdivision_name, using `{{Country abbreviation}}`. For example, subdivision_name = United Kingdom will generate coordinates with "region:GB". In addition, wherever possible, subdivision_name1 will be used to determine the region. For example: subdivision_name=Canada and subdivision_name1=Ontario will yield "region:CA-ON". coordinates_type (below) overrides this parameter.
coordinates_type	optional	Can be used to override the default coordinate parameters for the coordinates. May include type:, scale:, dim:, region:, and/or source:, joined by underscores ("_"). If `\|coordinates_type=` is omitted or blank: scale:, dim:, and source: will be left unspecified. region: will be set by `\|coordinates_region=` (above), `\|subdivision_name=` and `\|subdivision_name1=` (below), and type: will be set to "type:city" if the population_total field is omitted or blank. If population_total is a number without commas, "type:city(population_total)" is used. But if population_total includes letters or punctuation, "type:city" is used.
coordinates_footnotes	optional	Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
coordinates_wikidata	optional	If the parameter is set to any non-blank value, and the `\|coordinates=` parameter is blank/omitted, and the coordinates are on the corresponding wikidata page, then the coordinates will be pulled from wikidata.
grid_name grid_position	optional	Name of a regional grid system and position on the regional grid
Location, established, seat, subdivisions, government, leaders [编辑]
Parameter name	Usage	Description
Location
subdivision_type	optional	almost always `Country`
subdivision_name	optional	Depends on the subdivision_type—use the name in text form, sample: `United States` or `United States`, flag icons or flag templates can be used in this field.
subdivision_type1 to subdivision_type6	optional	Can be State/Province, region, county.
subdivision_name1 to subdivision_name6	optional	Use the name in text form, sample: `Florida` or `[[Florida]]`. Flag icons or flag templates can be used in this field per WP:MOSFLAG.
Established
established_title	optional	Example: Founded
established_date	optional
established_title1	optional	Example: Incorporated (town) [Note that "established_title1" is distinct from "established_title"; you can think of "established_title" as behaving like "established_title0".]
established_date1	optional	[See note for "established_title1".]
established_title2	optional	Example: Incorporated (city)
established_date2	optional
established_title3	optional
established_date3	optional
established_title4	optional
established_date4	optional
established_title5	optional
established_date5	optional
established_title6	optional
established_date6	optional
established_title7	optional
established_date7	optional
extinct_title	optional	For when a settlement ceases to exist
extinct_date	optional
founder	optional	Who the settlement was founded by
named_for	optional	The source of the name of the settlement (a person, a place, et cetera)
Seat of government
seat_type	optional	The label for the seat of government (defaults to Seat).
seat	optional	The seat of government.
Smaller parts (e.g. boroughs of a city)
parts_type	optional	The label for the smaller subdivisions (defaults to Boroughs).
parts_style	optional	Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts	optional	Text or header of the list of smaller subdivisions.
p1 p2 to p50	optional	The smaller subdivisions to be listed. Example: Warsaw
Government type, leaders
government_footnotes	optional	Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
government_type	optional	Example: Mayor-council government
governing_body	optional	Name of the place's governing body
leader_party	optional	Political party of the place's leader
leader_title	optional	First title of the place's leader, e.g. Mayor
leader_name	optional	Name of the place's leader
leader_title1 to leader_title4	optional
leader_name1 to leader_name4	optional	For long lists use `{{Collapsible list}}`. See Halifax for an example.
Geographic information [编辑]
These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Parameter name	Usage	Description
Display settings
total_type	optional	Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to .
unit_pref	optional	To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK. For the middle east, a unit preference of dunam can be entered (only affects total area). All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
Area
area_footnotes	optional	Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
area_magnitude	optional	Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. 1 E+6 m²).
dunam_link	optional	If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting `dunam_link` to another measure (e.g. `dunam_link=water`). Linking can also be turned off by setting the parameter to something else (e.g. `dunam_link=none` or `dunam_link=off`).
area_total_km2	optional	Total area in square kilometers—symbol: km². Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
area_total_ha	optional	Total area in hectares—symbol: ha. Value must be entered in raw format, no commas or spaces. Auto-converted to display acres if area_total_acre is empty.
area_total_sq_mi	optional	Total area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
area_total_acre	optional	Total area in acres. Value must be entered in raw format, no commas or spaces. Auto-converted to display hectares if area_total_ha is empty.
area_total_dunam	optional	Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acreds if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah
area_land_km2	optional	Land area in square kilometers—symbol: km². Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
area_land_sq_mi	optional	Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
area_land_ha	optional	similar to `area_total_ha`
area_land_dunam	optional	similar to `area_total_dunam`
area_land_acre	optional	similar to `area_total_acre`
area_water_km2	optional	Water area in square kilometers—symbol: km². Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
area_water_sq_mi	optional	Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
area_water_ha	optional	similar to `area_total_ha`
area_water_dunam	optional	similar to `area_total_dunam`
area_water_acre	optional	similar to `area_total_acre`
area_water_percent	optional	percent of water without the "%"
area_urban_km2	optional
area_urban_sq_mi	optional
area_urban_ha	optional	similar to `area_total_ha`
area_urban_dunam	optional	similar to `area_total_dunam`
area_urban_acre	optional	similar to `area_total_acre`
area_rural_km2	optional
area_rural_sq_mi	optional
area_rural_ha	optional	similar to `area_total_ha`
area_rural_dunam	optional	similar to `area_total_dunam`
area_rural_acre	optional	similar to `area_total_acre`
area_metro_km2	optional
area_metro_sq_mi	optional
area_metro_ha	optional	similar to `area_total_ha`
area_metro_dunam	optional	similar to `area_total_dunam`
area_metro_acre	optional	similar to `area_total_acre`
area_rank	optional	The settlement's area, as ranked within its parent sub-division
area_blank1_title	optional	Example see London
area_blank1_km2	optional
area_blank1_sq_mi	optional
area_blank1_ha	optional	similar to `area_total_ha`
area_blank1_dunam	optional	similar to `area_total_dunam`
area_blank1_acre	optional	similar to `area_total_acre`
area_blank2_title	optional
area_blank2_km2	optional
area_blank2_sq_mi	optional
area_blank2_ha	optional	similar to `area_total_ha`
area_blank2_dunam	optional	similar to `area_total_dunam`
area_blank2_acre	optional	similar to `area_total_acre`
area_note	optional	A place for additional information such as the name of the source.
Dimensions
dimensions_footnotes	optional	Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
length_km	optional	Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty.
length_mi	optional	Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty.
width_km	optional	Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty.
width_mi	optional	Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty.
Elevation
elevation_footnotes	optional	Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
elevation_m	optional	Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the "max" and "min" fields below
elevation_ft	optional	Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (e.g. 50–500 ft ) is desired, use the "max" and "min" fields below
elevation_max_footnotes elevation_min_footnotes	optional	Same as above, but for the "max" and "min" elevations. See Leeds.
elevation_max_m elevation_max_ft elevation_max_rank elevation_min_m elevation_min_ft elevation_min_rank	optional	Used to give highest & lowest elevations and rank, instead of just a single value. Example: Halifax Regional Municipality.
Population, demographics [编辑]
The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. *To calculate density with respect to the total area automatically, type auto* in place of any density value.**
Parameter name	Usage	Description
Population
population_total	optional	Actual population (see below for estimates) preferably consisting of digits only (without any commas)
population_as_of	optional	The year for the population total (usually a census year)
population_footnotes	optional	Reference(s) for population, placed within <ref> </ref> tags
population_density_km2	optional
population_density_sq_mi	optional
population_est	optional	Population estimate.
pop_est_as_of	optional	The year or month & year of the population estimate
pop_est_footnotes	optional	Reference(s) for population estimate, placed within <ref> </ref> tags
population_urban	optional
population_urban_footnotes	optional	Reference(s) for urban population, placed within <ref> </ref> tags
population_density_urban_km2	optional
population_density_urban_sq_mi	optional
population_rural	optional
population_rural_footnotes	optional	Reference(s) for rural population, placed within <ref> </ref> tags
population_density_rural_km2	optional
population_density_rural_sq_mi	optional
population_metro	optional
population_metro_footnotes	optional	Reference(s) for metro population, placed within <ref> </ref> tags
population_density_metro_km2	optional
population_density_metro_sq_mi	optional
population_rank	optional	The settlement's population, as ranked within its parent sub-division
population_density_rank	optional	The settlement's population density, as ranked within its parent sub-division
population_blank1_title	optional	Can be used for estimates. Example: Windsor, Ontario
population_blank1	optional	The population value for blank1_title
population_density_blank1_km2	optional
population_density_blank1_sq_mi	optional
population_blank2_title	optional
population_blank2	optional
population_density_blank2_km2	optional
population_density_blank2_sq_mi	optional
population_demonym	optional	A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian.
population_note	optional	A place for additional information such as the name of the source. See Windsor, Ontario for example.
Demographics (section 1)
demographics_type1	optional	Section Header. For example: Ethnicity
demographics1_footnotes	optional	Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
demographics1_title1 to demographics1_title5	optional	Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1 to demographics1_info5	optional	Information related to the "titles". For example: 50%, 25%, 10%...
Demographics (section 2)
demographics_type2	optional	A second section header. For example: Languages
demographics2_footnotes	optional	Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at `{{Cite web}}`
demographics2_title1 to demographics2_title5	optional	Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1 to demographics2_info5	optional	Information related to the "titles" for type2. For example: 50%, 25%, 10%...
Other information [编辑]
Parameter name	Usage	Description
Time zone(s)
timezone1	optional
utc_offset1	optional
timezone1_DST	optional
utc_offset1_DST	optional
timezone2	optional	A second timezone field for larger areas such as a Province.
utc_offset2	optional
timezone2_DST	optional
utc_offset2_DST	optional
Postal code(s) & area code
postal_code_type	optional
postal_code	optional
postal2_code_type	optional
postal2_code	optional
area_code_type	optional	If left blank/not used template will default to "Area code(s)"
area_code	optional
geocode	optional	See Geocode
iso_code	optional	See ISO 3166
registration_plate_type	optional	If left blank/not used template will default to "Vehicle registration"
registration_plate	optional	See Vehicle registration plate
Blank fields (section 1)
blank_name_sec1	optional	Fields used to display other information. The name is displayed in bold on the left side of the infobox.
blank_info_sec1	optional	The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw
blank1_name_sec1 to blank7_name_sec1	optional	Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec1 to blank7_info_sec1	optional
Blank fields (section 2)
blank_name_sec2	optional	For a second section of blank fields
blank_info_sec2	optional	Example: Beijing
blank1_name_sec2 to blank7_name_sec2	optional	Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec2 to blank7_info_sec2	optional
Website, footnotes
website	optional	External link to official website, Use `{{URL}}`, thus: {{URL\|example.com}}
footnotes	optional	Text to be displayed at the bottom of the infobox

Examples

Example 1

Template:Infobox settlement

<!-- NOTE: This differs from the actual Chicago infobox in order to provide examples. -->
{{Infobox settlement
| name = Chicago
| settlement_type = [[City (Illinois)|City]]
| image_skyline = Chicago montage.jpg
| imagesize = 275px <!--default is 250px-->
| image_caption = Clockwise from top: [[Downtown Chicago]], the [[Chicago Theatre]], the [[Chicago 'L']], [[Navy Pier]], [[Millennium Park]], the [[Field Museum]], and the [[Willis Tower|Willis (formerly Sears) Tower]]
| image_flag = Flag of Chicago, Illinois.svg
| image_seal = Seal of Chicago, Illinois.svg
| etymology = {{lang-mia|shikaakwa}} ("wild onion" or "wild garlic")
| nickname = [[Origin of Chicago's "Windy City" nickname|The Windy City]], The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at [[List of nicknames for Chicago]]
| motto = {{lang-la|Urbs in Horto}} (''City in a Garden''), Make Big Plans (Make No Small Plans), I Will
| image_map = US-IL-Chicago.png
| map_caption = Location in the [[Chicago metropolitan area]] and Illinois
| pushpin_map = USA
| pushpin_map_caption = Location in the United States
| coordinates = {{coord|41|50|15|N|87|40|55|W}}
| coordinates_footnotes = <ref name="USCB Gazetteer 2010"/>
| subdivision_type = Country
| subdivision_name = United States
| subdivision_type1 = State
| subdivision_name1 = [[Illinois]]
| subdivision_type2 = [[List of counties in Illinois|Counties]]
| subdivision_name2 = [[Cook County, Illinois|Cook]], [[DuPage County, Illinois|DuPage]]
| established_title = Settled
| established_date = 1770s
| established_title2 = [[Municipal corporation|Incorporated]]
| established_date2 = March 4, 1837
| founder =
| named_for = {{lang-mia|shikaakwa}}<br /> ("Wild onion")
| government_type = [[Mayor–council government|Mayor–council]]
| leader_title = [[Mayor of Chicago|Mayor]]
| leader_name = [[Rahm Emanuel]]
| leader_party = [[Democratic Party (United States)|D]]
| leader_title1 = [[City council|Council]]
| leader_name1 = [[Chicago City Council]]
| unit_pref = Imperial
| area_footnotes = <ref name="USCB Gazetteer 2010">{{cite web | url = http://www.census.gov/geo/www/gazetteer/files/Gaz_places_national.txt | title = 2010 United States Census Gazetteer for Places: January 1, 2010 | format = text | work = 2010 United States Census | publisher = [[United States Census Bureau]] | date = April 2010 | accessdate = August 1, 2012}}</ref>
| area_magnitude = 1 E+8
| area_total_sq_mi = 234.114
| area_land_sq_mi  = 227.635
| area_water_sq_mi = 6.479
| area_water_percent = 3
| area_urban_sq_mi = 2123
| area_metro_sq_mi = 10874
| elevation_footnotes = <ref name="GNIS"/>
| elevation_ft = 594
| elevation_m  = 181
| population_as_of = [[2010 United States Census|2010]]
| population_footnotes = <ref name="USCB PopEstCities 2011">{{cite web | url = http://www.census.gov/popest/data/cities/totals/2011/tables/SUB-EST2011-01.csv | title = Annual Estimates of the Resident Population for Incorporated Places Over 50,000, Ranked by July 1, 2011 Population | format = [[comma-separated values|CSV]] | work = 2011 Population Estimates | publisher = [[United States Census Bureau]], Population Division | date = June 2012 | accessdate = August 1, 2012}}</ref><ref name="USCB Metro 2010">{{cite web | url=http://www.census.gov/prod/cen2010/briefs/c2010br-01.pdf | title = Population Change for the Ten Most Populous and Fastest Growing Metropolitan Statiscal Areas: 2000 to 2010 | date = March 2011 | publisher = [[U.S. Census Bureau]] | page = 6 |accessdate = April 12, 2011}}</ref>
| population_total = 2,695,598
| pop_est_as_of = 2011
| population_est = 2,707,120
| population_rank  = [[List of United States cities by population|3rd US]]
| population_density_sq_mi = 11,892.4<!-- 2011 population_est / area_land_sq_mi -->
| population_urban = 8711000
| population_density_urban_sq_mi = auto
| population_metro = 9461105
| population_density_metro_sq_mi = auto
| population_demonym = Chicagoan
| timezone = [[Central Standard Time|CST]]
| utc_offset = −06:00
| timezone_DST = [[Central Daylight Time|CDT]]
| utc_offset_DST = −05:00
| area_code_type = [[North American Numbering Plan|Area codes]]
| area_code = [[Area code 312|312]], [[Area code 773|773]], [[Area code 872|872]]
| blank_name = [[Federal Information Processing Standards|FIPS]] code
| blank_info = {{FIPS|17|14000}}
| blank1_name = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info = {{GNIS4|423587}}, {{GNIS4|428803}}
| website = {{URL|www.cityofchicago.org}}
| footnotes = <ref name="GNIS">{{Cite GNIS|428803|City of Chicago|April 12, 2011}}</ref>
}}

References

Example 2

Template:Infobox settlement

{{Infobox settlement
| name                    = Detroit
| settlement_type         = [[City (Michigan)|City]]
| official_name           = City of Detroit
| image_skyline           = Detroit Montage.jpg
| imagesize               = 290px
| image_caption           = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag              = Flag of Detroit, Michigan.svg

| image_seal              = Seal of Detroit, Michigan.svg
| etymology               = {{lang-fr|détroit}} ([[strait]])
| nickname                = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto                   = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize                 = 250x200px
| map_caption             = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map             = USA
| pushpin_map_caption     = Location within the [[Contiguous United States|contiguous United States of America]]
| coordinates = {{coord|42|19|53|N|83|2|45|W}}
| coordinates_footnotes   =
| subdivision_type        = Country
| subdivision_name        = {{flagu|United States of America}}
| subdivision_type1       = State
| subdivision_name1       = {{flag|Michigan}}
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne]]
| established_title       = Founded
| established_date        = 1701
| established_title2      = Incorporated
| established_date2       = 1806
| government_footnotes    = <!-- for references: use<ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = [[Democratic Party (United States)|D]]
| leader_title1           = [[Detroit City Council|City Council]]
| leader_name1            = {{collapsible list|bullets=yes
 | title = Members
 | 1 = [[Charles Pugh]] – Council President
 | 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
 | 3 = [[JoAnn Watson]]
 | 4 = [[Kenneth Cockrel, Jr.]]
 | 5 = [[Saunteel Jenkins]]
 | 6 = [[Andre Spivey]]
 | 7 = [[James Tate (Detroit politician)|James Tate]]
 | 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
 | 9 = [[Kwame Kenyatta]]
 }}
| unit_pref               = Imperial
| area_footnotes          =
| area_magnitude          =
| area_total_sq_mi        = 142.87
| area_total_km2          = 370.03
| area_land_sq_mi         = 138.75
| area_land_km2           = 359.36
| area_water_sq_mi        = 4.12
| area_water_km2          = 10.67
| area_urban_sq_mi        = 1295
| area_metro_sq_mi        = 3913
| elevation_footnotes     =
| elevation_ft            = 600
| population_as_of        = 2011
| population_footnotes    =
| population_total        = 706,585
| population_rank         = [[List of United States cities by population|18th in U.S.]]
| population_urban        = 3,863,924
| population_metro        = 4,285,832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5,207,434 (US: [[List of United States combined statistical areas|11th]])
| population_density_sq_mi= {{#expr:713777/138.8 round 0}}
| population_demonym      = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = −5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = −4
| postal_code_type        =
| postal_code             =
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standards|FIPS code]]
| blank_info              = {{FIPS|26|22000}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               =
}}

Redirects and calls

At least 0 other templates call this one and many templates redirect here.

Supporting templates

The following is a list of sub-templates used by Infobox settlement. See the current list of all sub-templates for documentation, sandboxes, testcases, etc.

Microformat

Template:UF-hcard-geo

TemplateData

TemplateData
这是用于新版可视化编辑器及其他工具的模板数据文档。 Infobox settlement模板数据 JSON内有语法错误。

Tracking categories

上述文档嵌入自Template:Infobox settlement/sandbox2/doc。
编者可以在本模板的沙盒和测试样例页面进行实验。
请在/doc子页面中添加分类。本模板的子页面。

Usage

Using metric units

Using non-metric units

Short version

Complete empty syntax, with comments

Parameter names and descriptions

Name and transliteration

Images, nickname, motto

Maps, coordinates

Location, established, seat, subdivisions, government, leaders

Geographic information

Population, demographics

Other information