跳转到内容

X86汇编语言/基本指令集

添加链接
本页使用了标题或全文手工转换
维基教科书，自由的教学读本

主页 > 电脑科学与技术书架 > X86汇编语言 > 基本指令集

数据搬移指令（Data transfer instructions）

[编辑]
  • MOV：在通用寄存器之间移动数据；在主存和通用或区段寄存器之间移动数据；将立即数值移动到通用寄存器。（Move data between general-purpose registers; move data between memory and general purpose or segment registers; move immediates to general-purpose registers.）
  • CMOVE/CMOVZ：Conditional move if equal/Conditional move if zero.
  • CMOVNE/CMOVNZ：Conditional move if not equal/Conditional move if not zero.
  • CMOVA/CMOVNBE：Conditional move if above/Conditional move if not below or equal.
  • CMOVAE/CMOVNB：Conditional move if above or equal/Conditional move if not below.
  • CMOVB/CMOVNAE：Conditional move if below/Conditional move if not above or equal.
  • CMOVBE/CMOVNA：Conditional move if below or equal/Conditional move if not above.
  • CMOVG/CMOVNLE：Conditional move if greater/Conditional move if not less or equal.
  • CMOVGE/CMOVNL：Conditional move if greater or equal/Conditional move if not less.
  • CMOVL/CMOVNGE：Conditional move if less/Conditional move if not greater or equal.
  • CMOVLE/CMOVNG：Conditional move if less or equal/Conditional move if not greater.
  • CMOVC：Conditional move if carry.
  • CMOVNC：Conditional move if not carry.
  • CMOVO：Conditional move if overflow.
  • CMOVNO：Conditional move if not overflow.
  • CMOVS：Conditional move if sign (negative).
  • CMOVNS：Conditional move if not sign (non-negative).
  • CMOVP/CMOVPE：Conditional move if parity/Conditional move if parity even.
  • CMOVNP/CMOVPO：Conditional move if not parity/Conditional move if parity odd.
  • XCHG：交换。（Exchange.）
  • BSWAP：Byte swap.
  • XADD：Exchange and add.
  • CMPXCHG：Compare and exchange.
  • CMPXCHG8B：Compare and exchange 8 bytes.
  • PUSH：Push onto stack.
  • POP：Pop off of stack.
  • PUSHA/PUSHAD：Push general-purpose registers onto stack.
  • POPA/POPAD：Pop general-purpose registers from stack.
  • CWD/CDQ：Convert word to doubleword/Convert doubleword to quadword.
  • CBW/CWDE：Convert byte to word/Convert word to doubleword in EAX register.
  • MOVSX：Move and sign extend.
  • MOVZX：Move and zero extend.

二进制算术指令（Binary Arithmetic Instructions）

[编辑]
  • ADCX：Unsigned integer add with carry.
  • ADOX：Unsigned integer add with overflow.
  • ADD：Integer add.
  • ADC：含进位的加法。（Add with carry.）
  • SUB：减法。（Subtract.）
  • SBB：含借位的减法。Subtract with borrow.
  • IMUL：有号数乘法。（Signed multiply.）
  • MUL：无号数乘法。（Unsigned multiply.）
  • IDIV：有号数除法。（Signed divide.）
  • DIV：无号数除法。（Unsigned divide.）
  • INC：加一。（Increment.）
  • DEC：减一。（Decrement.）
  • NEG：Negate.
  • CMP：比较。（Compare.）

十进制算术指令（Decimal Arithmetic Instructions）

[编辑]
  • DAA：Decimal adjust after addition.
  • DAS：Decimal adjust after subtraction.
  • AAA：ASCII adjust after addition.
  • AAS：ASCII adjust after subtraction.
  • AAM：ASCII adjust after multiplication.
  • AAD：ASCII adjust before division.

逻辑指令（Decimal Arithmetic Instructions）

[编辑]
  • AND：Perform bitwise logical AND.
  • OR：Perform bitwise logical OR.
  • XOR：Perform bitwise logical exclusive OR.
  • NOT：Perform bitwise logical NOT

移位及轮转指令（Shift and Rotate Instruction）

[编辑]
  • SAR：Shift arithmetic right.
  • SHR：Shift logical right.
  • SAL/SHL：Shift arithmetic left/Shift logical left.
  • SHRD：Shift right double.
  • SHLD：Shift left double.
  • ROR：Rotate right.
  • ROL：Rotate left.
  • RCR：Rotate through carry right.
  • RCL：Rotate through carry left

位元及字节指令（Bit and Byte Instructions）

[编辑]
  • BT：Bit test.
  • BTS：Bit test and set.
  • BTR：Bit test and reset.
  • BTC：Bit test and complement.
  • BSF：Bit scan forward.
  • BSR：Bit scan reverse.
  • SETE/SETZ：Set byte if equal/Set byte if zero.
  • SETNE/SETNZ：Set byte if not equal/Set byte if not zero.
  • SETA/SETNBE：Set byte if above/Set byte if not below or equal.
  • SETAE/SETNB/SETNC：Set byte if above or equal/Set byte if not below/Set byte if not carry.
  • SETB/SETNAE/SETC：Set byte if below/Set byte if not above or equal/Set byte if carry.
  • SETBE/SETNA：Set byte if below or equal/Set byte if not above.
  • SETG/SETNLE：Set byte if greater/Set byte if not less or equal.
  • SETGE/SETNL：Set byte if greater or equal/Set byte if not less.
  • SETL/SETNGE：Set byte if less/Set byte if not greater or equal.
  • SETLE/SETNG：Set byte if less or equal/Set byte if not greater.
  • SETS：Set byte if sign (negative).
  • SETNS：Set byte if not sign (non-negative).
  • SETO：Set byte if overflow.
  • SETNO：Set byte if not overflow.
  • SETPE/SETP：Set byte if parity even/Set byte if parity.
  • SETPO/SETNP：Set byte if parity odd/Set byte if not parity.
  • TEST：Logical compare.
  • CRC32：Provides hardware acceleration to calculate cyclic redundancy checks for fast and efficient implementation of data integrity protocols.
  • POPCNT：This instruction calculates of number of bits set to 1 in the second operand (source) and returns the count in the first operand (a destination register)

控制转移指令（Control Transfer Instruction）

[编辑]
  • JMP：无条件跳跃（Jump.）
  • JE/JZ：Jump if equal/Jump if zero.
  • JNE/JNZ：Jump if not equal/Jump if not zero.
  • JA/JNBE：Jump if above/Jump if not below or equal.
  • JAE/JNB：Jump if above or equal/Jump if not below.
  • JB/JNAE：Jump if below/Jump if not above or equal.
  • JBE/JNA：Jump if below or equal/Jump if not above.
  • JG/JNLE：Jump if greater/Jump if not less or equal.
  • JGE/JNL：Jump if greater or equal/Jump if not less.
  • JL/JNGE：Jump if less/Jump if not greater or equal.
  • JLE/JNG：Jump if less or equal/Jump if not greater.
  • JC：Jump if carry.
  • JNC：Jump if not carry.
  • JO：Jump if overflow.
  • JNO：Jump if not overflow.
  • JS：Jump if sign (negative).
  • JN：Jump if not sign (non-negative).
  • JPO/JNP：Jump if parity odd/Jump if not parity.
  • JPE/JP：Jump if parity even/Jump if parity.
  • JCXZ/JECXZ：Jump register CX zero/Jump register ECX zero.
  • LOOP：Loop with ECX counter.
  • LOOPZ/LOOPE：Loop with ECX and zero/Loop with ECX and equal.
  • LOOPNZ/LOOPNE：Loop with ECX and not zero/Loop with ECX and not equal.
  • CALL：调用副程序或函数。（Call procedure.）
  • RET：从副程序或函数返回。（Return.）
  • IRET：从插断返回。（Return from interrupt.）
  • INT：软件插断。（Software interrupt.）
  • INTO：Interrupt on overflow.
  • BOUND：Detect value out of range.
  • ENTER：High-level procedure entry.
  • LEAVE：High-level procedure exit

字符串指令（String Instruction）

[编辑]
  • MOVS/MOVSB：Move string/Move byte string.
  • MOVS/MOVSW：Move string/Move word string.
  • MOVS/MOVSD：Move string/Move doubleword string.
  • CMPS/CMPSB：Compare string/Compare byte string.
  • CMPS/CMPSW：Compare string/Compare word string.
  • CMPS/CMPSD：Compare string/Compare doubleword string.
  • SCAS/SCASB：Scan string/Scan byte string.
  • SCAS/SCASW：Scan string/Scan word string.
  • SCAS/SCASD：Scan string/Scan doubleword string.
  • LODS/LODSB：Load string/Load byte string.
  • LODS/LODSW：Load string/Load word string.
  • LODS/LODSD：Load string/Load doubleword string.
  • STOS/STOSB：Store string/Store byte string.
  • STOS/STOSW：Store string/Store word string.
  • STOS/STOSD：Store string/Store doubleword string.
  • REP：Repeat while ECX not zero.
  • REPE/REPZ：Repeat while equal/Repeat while zero.
  • REPNE/REPNZ：Repeat while not equal/Repeat while not zero.

输入及输出指令（I/O Instruction）

[编辑]
  • IN：Read from a port.
  • OUT：Write to a port.
  • INS/INSB：Input string from port/Input byte string from port.
  • INS/INSW：Input string from port/Input word string from port.
  • INS/INSD：Input string from port/Input doubleword string from port.
  • OUTS/OUTSB：Output string to port/Output byte string to port.
  • OUTS/OUTSW：Output string to port/Output word string to port

进入及离开指令（Enter and Leave Instruction）

[编辑]
  • ENTER：High-level procedure entry.
  • LEAVE：High-level procedure exit

旗标控制(EFLAG)指令（Flag Control (EFLAG) Instructions）

[编辑]
  • STC：设置进位旗标。（Set carry flag.）
  • CLC：清除进位旗标。（Clear the carry flag.）
  • CMC：Complement the carry flag.
  • CLD：Clear the direction flag.
  • STD：Set direction flag.
  • LAHF：Load flags into AH register.
  • SAHF：Store AH register into flags.
  • PUSHF/PUSHFD：Push EFLAGS onto stack.
  • POPF/POPFD：Pop EFLAGS from stack.
  • STI：设置插断旗标。（Set interrupt flag.）
  • CLI：清除插断旗标。（Clear the interrupt flag）

区段寄存器指令（Segment Register Instruction）

[编辑]
  • LDS：Load far pointer using DS.
  • LES：Load far pointer using ES.
  • LFS：Load far pointer using FS.
  • LGS：Load far pointer using GS.
  • LSS：Load far pointer using SS

杂项指令（Miscellaneous Instruction）

[编辑]
  • LEA：Load effective address.
  • NOP：无运算。（No operation.）
  • UD：Undefined instruction.
  • XLAT/XLATB：Table lookup translation.
  • CPUID：Processor identification.
  • MOVBE： Move data after swapping data bytes.
  • PREFETCHW： Prefetch data into cache in anticipation of write.
  • PREFETCHWT： Prefetch hint T1 with intent to write.
  • CLFLUSH：Flushes and invalidates a memory operand and its associated cache line from all levels of the processor’s cache hierarchy.
  • CLFLUSHOPT：Flushes and invalidates a memory operand and its associated cache line from all levels of the processor’s cache hierarchy with optimized memory system throughput

用户; 使用者=>zh-my:用户模式扩展状态的存储及还原指令（User Mode Extended Sate Save/Restore Instruction）

[编辑]
  • XSAVE：Save processor extended states to memory.
  • XSAVEC：Save processor extended states with compaction to memory.
  • XSAVEOPT：Save processor extended states to memory, optimized.
  • XRSTOR：Restore processor extended states from memory.
  • XGETBV：Reads the state of an extended control register

随机数产生指令（Random Number Generator Instructions）

[编辑]
  • RDRAND：Retrieves a random number generated from hardware.
  • RDSEED：Retrieves a random number generated from hardwar

（BMI1, BMI2）

[编辑]
  • ANDN：Bitwise AND of first source with inverted 2nd source operands.
  • BEXTR：Contiguous bitwise extract.
  • BLSI：Extract lowest set bit.
  • BLSMSK：Set all lower bits below first set bit to 1.
  • BLSR：Reset lowest set bit.
  • BZHI：Zero high bits starting from specified bit position.
  • LZCNT：Count the number leading zero bits.
  • MULX：Unsigned multiply without affecting arithmetic flags.
  • PDEP：Parallel deposit of bits using a mask.
  • PEXT：Parallel extraction of bits using a mask.
  • RORX：Rotate right without affecting arithmetic flags.
  • SARX：Shift arithmetic right.
  • SHLX：Shift logic left.
  • SHRX：Shift logic right.
  • TZCNT：Count the number trailing zero bits

（Detection of VEX-encoded GPR Instructions, LZCNT and TZCNT, PREFETCH）

[编辑]

以下内容待整理

[编辑]

数据搬移指令 （Data transfer instructions）

[编辑]

整数运算指令

[编辑]

加法

[编辑]
  • add : 加
  • adc : 加 (含进位)
  • inc : 加1

减法

[编辑]
  • sub : 减
  • sbb : 减 (含借位)
  • dec : 减1

乘法

[编辑]
  • mul : 乘 (无号数)
  • imul : 乘 (有号数)

除法

[编辑]
  • div : 除 (无号数)
  • idiv : 除 (有号数)

逻辑运算指令

[编辑]

位元位移指令

[编辑]

程序流程控制

[编辑]

跳越指令

[编辑]

无条件跳越

[编辑]

无号数运算(比较)后使用的条件跳越指令

[编辑]
指令 意义 条件
je 若等于则跳越 x = y ZF=1
jne 若不等于则跳越 x≠y ZF=0
ja
jnbe 		若高于则跳越
若不低于则跳越 		x > y CF=0且ZF=0
jae
jnb 		若高于或等于则跳越
若不低于或等于则跳越 		x≧y CF=0
jb
jnae 		若低于则跳越
若不高于或等于则跳越 		x < y CF=1
jbe
jna 		若低于或等于则跳越
若不高于则跳越 		x≦y CF=1或ZF=1

有号数运算(比较)后使用的条件跳越指令

[编辑]
指令 意义 条件
je 若等于则跳越 x = y ZF=1
jne 若不等于则跳越 x≠y ZF=0
jg
jnle 		若大于则跳越
若不低于或等于则跳越 		x > y ZF=0且SF=OF
jge
jnl 		若高于于或等于则跳越
若不低于则跳越 		x≧y SF=OF
jl
jngl 		若低于则跳越
若不大于或等于则跳越 		x < y SF≠OF
jle
jng 		若低于或等于则跳越
若不大于则跳越 		x≦y ZF=1或SF≠OF

依旗号状态判断的条件跳越指令

[编辑]
指令 意义 条件
jc 若进位则跳越 CF=1
jnc 若无进位则跳越 CF=0
js 若为负数则跳越 SF=1
jns 若为正数则跳越 SF=0
jz 若等于0则跳越 ZF=1
jnz 若不等于0则跳越 ZF=0
jp 若同位则跳越 PF=1
jnp 若没有同位则跳越 PF=0
jpe 若偶同位则跳越 PF=1
jpo 若奇同位则跳越 PF=0
jo 若溢出则跳越 OF=1
jno 若没有溢出则跳越 OF=0

循环控制指令

[编辑]

中断指令（Interrupt Instruction）

[编辑]
  • int : 进入中断处理程序
  • into : 运算溢出，产生中断
  • iret : 自中断处理程序中返回

旗标控制相关指令

[编辑]

中断标志位

[编辑]
  • cli : 清中断允许
  • sti : 置中断允许

进位标志位

[编辑]
  • clc : 清进位标志位
  • stc : 置进位标志位
  • cmc : 进位标志位取反
  • 以下暂存
    mov：這是組語裡面最常見的指令,將數值記入暫存器或是將A暫存器的內涵值移入B暫存器等等.
    範例語法：  mov 目的,來源        <==將來源值移入目的暫存器
                 mov DX,[zzz]       <==將zzz變數內涵移入DX暫存器
                 mov EAX,14h        <==移14h值移入EAX

    int：呼叫中斷來處理之前暫存器內涵值所對應的工作.例如Linux是int 0x80.
    add：加
     sub：減
     mul：乘
     div：除
检索自“https://zh.wikibooks.org/w/index.php?title=X86組合語言/基本指令集&oldid=143752”